Jaw Crusher Boot Precautions

Jaw crusher is a common mechanical equipment for crushing ore processing. Shanghai Joyal Mining Machinery is a manufacturer of crushing and processing machinery for ore. Joyal reminds users to pay attention to the fact that the jaw crusher needs to pay attention to some matters before starting. In the abnormal situation of the jaw crusher during use, Joyal and everyone said that the jaw crusher needs to pay attention before starting.

Users need to carefully check whether the main parts of the crusher are intact, whether the connecting parts such as fastening bolts are loose, whether the pulley cover is complete, and carefully check whether the transmission belt is good. If unsafe phenomenon is found, it should be replaced in time, when the belt or pulley When there is oil on it, use a rag to wipe off the oil.

Users need to check auxiliary equipment such as feeders, belt conveyors, electrical equipment and signal equipment. Some crusher motor starting ability is less than the crusher’s needs. The flywheel can be rotated by a certain angle to make the connecting rod in the most favorable position for starting, that is, the eccentricity is at the uppermost part of the center line of the eccentric shaft.

For large and medium-sized jaw crushers, check the oil volume of the oil tank before starting, and replenish the oil if necessary. Carefully check the connection of the thrust plate for adequate grease. In the jaw crusher with a cooling water device in the lubrication part such as the eccentric bearing, the circulating cooling water valve should be opened in advance; if there is a large ore or debris in the crushing chamber, it must be cleaned to ensure that the crusher starts under no load. . After doing these preparations, send a signal to drive, you need to pay attention before driving.